Headers, Intake, & Exhaust Custom Exhaust? New Headers? Need Opinions on Intakes? Discuss making your ride breathe better here.

Dynomax exhaust

Thread Tools
 
Search this Thread
 
Old Oct 3, 2008 | 11:33 PM
  #1  
kartl's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2008
Posts: 22
Default Dynomax exhaust

Good day guys just want some comments about the dynomax exhaust system, because i have some plans on upgrading may cars exhaust for more power and better sounding thanks in advance.
 
Old Oct 4, 2008 | 11:19 AM
  #2  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: Dynomax exhaust

Some would state the exhaust sound would improve but as far as increased power, not noticable.


 
Old Oct 4, 2008 | 06:47 PM
  #3  
94camguy's Avatar
Senior Member
Joined: Feb 2008
Posts: 262
Default RE: Dynomax exhaust

Yea, for the most part, the basic upgrades (intake and exhaust) wont really gain much in the way of horsepower. Even a K&N intake will only get 5hp, if that.
 
Old Oct 7, 2008 | 10:23 PM
  #4  
kartl's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2008
Posts: 22
Default RE: Dynomax exhaust

Hey thanks for the comment guys actually i very aware about the need up grades involed needed to maximizing your engines power, i just curious about what brand would be approriete on my taste about dynomax i read about its promo w/c dynomax rebate
 
Old Oct 8, 2008 | 07:08 AM
  #5  
Camry05WS's Avatar
Senior Member
Joined: Apr 2007
Posts: 143
Default RE: Dynomax exhaust

I had a borla exhaust on my Camry. I also have a cold air intake, pully kit, trd springs, koni shocks, trd clutch, trd differential, brembo drilled rotors, and steel break lines. Even with all of this done it is just a little bit faster than the factory 2.4L.
http://www.cardomain.com/ride/3022632
and
https://www.camryforums.com/m_11733/tm.htm
I hope this helps you a little bit
Nathan
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dan_Lemur
Headers, Intake, & Exhaust
12
Jul 3, 2007 05:32 AM
Dan_Lemur
Headers, Intake, & Exhaust
4
Mar 11, 2006 05:26 AM
gthegreek
Headers, Intake, & Exhaust
0
Dec 18, 2005 04:57 AM
landshark
General Tech
0
Nov 11, 2005 08:59 PM




All times are GMT -5. The time now is 06:50 PM.