Hey everyone I need some help finding out where a vaccum hose goes. Its coming off the throttle body and it look to clamp into the intake hose as a guide but I can not figure it out past that. Its on a 96 2.2L. I'll take a pic later to help more. Thanks

 

A picture would help. Small or large hose, 1 of a group of 3 or 4 or seperate when coming off the throttle body?

 

Its a single hose by its self on top of the throttle body and its larger than any of the other hoses coming off it.

 

On the throttle body area, one hose goes to the VSV (or TVV) for the EVAP system, two hoses go to the EGR vacuum modulator and a large hose goes to the PCV valve. There may another separate hose going to a throttle dashpot; it makes a small loop towards the air intake hose then drops down to the dashpot.